Security Roller Shutter – Insulated – Economy – London, Essex
Stylish and affordable shutters with a wide range of uses throughout most applications. The high quality and compact nature of Euroflex roller shutters in London and Essex from Abacus Shutters make this a first choice for many structural openings. The Euroflex meets today’s architectural demands for aesthetics, reliability, performance and safety and our EcoTech polyurethane foam infill ensures that Euroflex doors minimise energy waste, both with heat ‘flow through’ and around the curtain.
Opening Speed
Curtain
Constructed from interlocking pre-galvanised steel lathes with an Ecotech formula foam infill which is CFC free and ODP zero with a low global warming potential value of 3. Each panel section is 94mm deep with a multi-ribbed face for rigidity.
End Locks
The curtain when assembled is held in position with purposely designed injection moulded end fittings, manufactured from hard wearing nylon-6 which sits on the outside of the panels minimising scuffing and damage.
Bottom Bar/Seal
The bottom panel of the shutter is terminated with a purpose designed plastic extrusion complete with interlocking (EPDM) rubber weather seal.
Barrel
Manufactured from seamless mild steel tube to BS 4760 Grade 50C. Tube gauge to suit shutter width and height. Maximum barrel deflection 1:400. Fitted with precision machined BDMS axles to BS 970 EN933 standard.
Guides
Cold rolled steel channels manufactured from 2mm x 22swg pre galvanised steel to BS 2989: 1982, welded to 100mm x 65mm x 3mm galvanised support angles. Incorporates twin vertical brushes on both inner and outer faces of the guide. The guide profile is designed with reduced working faces and tapered inner faces. Complete with continuous 100mm x 65mm galvanised fixing angle and wind lock guides for areas of high wind pressure.
End Plates
Fabricated from mild steel plates complete with angle support brackets to BS 4360/43A. Size and gauge dependent upon door size and weight.
Operation
The shutter is arranged for an electric motor unit with manual hand hoisting and lowering facility. The motor unit is complete with an in-built safety drive system. Operating voltage is 400V. Three phase IP54 protection with 60% duty cycle maintenance free and TUV tested, complying with all current European safety standards. Opening speed of shutter is around 220mm per second.
Electrical Supply
Three phase neutral & earth, 415v, 50Hz rated at 16-20 amps in a 3ph 5-pin 16amp red industrial socket.
One Dimensional Heat Flow Value
U-Value
Irradiance
Contact Us
Please contact Abacus shutters on 0845 644 1225 if you require further information about Euroflex roller shutters in Essex, London and the surrounding areas.