Abacus Shutters Ltd offer a wide range of industrial shutters to provide an effective security solution for all types of industrial premises from new industrial units to factory extensions or refurbishments.
For lower budget projects we can offer our traditional single skin steel lath, although our premium range of industrial shutters have twin skinned insulated lath in addition to all the features of the traditional steel roller shutters.
Available in a wide range of colours and sizes, they provide excellent security protection for industrial environments.
Built to comply to BS-EN 13241, our range is fully guaranteed for 12 months and comes in a wide range of colours and sizes – plus there’s technical back up and contract assistance from the Abacus Shutters team throughout.
| Barrel | For openings up to 7m wide. Constructed from 127mm outside diameter x 120mm inside diameter steel tube with helicoil counter balance spring(s), mounted on 25mm bright steel shaft, with mild steel bearing blocks at each end. Incorporating high speed bearings. For 5m and over 139mm O/D x 126mm I/D tube. Finish – one coat of grey/black paint. |
| Electrical Operation | By means of 1/2 H.P. up to 2 H.P. geared motor complete with rotary limits and emergency hand mechanism. 3 push button control as standard. Electrical Supply – 240 volt 1 phase, 415 volt 3 phase. Additional information available on request. |
| Electrical Optional Extras | Safety edge to bottom rail, Key switch, Photo cell(s), Special voltages. |
| Gearing | By means of continuous galvanised hand chain, driving mild steel sprockets connected by high speed roll chain. |
| Curtain | Constructed from 75mm x 20swg curved interlocking galvanised single skin steel lath or 85-100mm wide flat interlocking insulated double skinned lath with nylon endlocks, both with galvanised steel bottom rail. |
| Side Guides | Constructed from 65-101mm x 3-5mm thick galvanised channel. Bolted to 75mm x 50mm or 100mm x 50mm mild steel angle. Finish – One coat of black paint. |
| Optional Extras | Wind Lock Guide Channel and anchors. Plasticol coated laths. Powder coated laths. Wicket gate for manual or electrical operated shutters. Hoods. Bottom draught strip. Heavy-duty weather seal |
