Sectional doors open vertically upwards, thereby creating space in front of and behind the opening. The door sections are parked directly underneath the ceiling, vertically above the structural opening, vertically up-and over or following the pitch of the roof. The exceptional breadth and depth of the range, thermal performance and certified safety make a sectional door convincing in every respect.
Door Panels: Specially designed insulated panels incorporating a capillary break to eliminate water ingress.
Panel Finish: Exterior: 0.5mm British Steel – HP200, Standard Colour, Galvanised or Powder Coated. Interior: 0.4mm British Steel – Stucco Embossed, Polyester Coated or Galvanised.
Panel Dimension: Normal Panel Width: 530mm – 610mm. Normal Panel Thickness: 40mm – 50 mm.
Insulation Value: 50mm thick rigid polyurethane foam. A density of 45kg/m³ and a U-Value of 0.44w/m³K.
Tracking System: Cold rolled guide and angles made from heavy gauge pre-galvanised steel.
Guide Rollers: Manufactured from ball races on plated bright mild steel.
Balance: Tempered helical torsion springs on bright steel shaft, mounted by self-aligning sealed ball bearings.
Hardware: Carriers, hinges and reinforcing channel made from heavy gauge pre-galvanised steel.
Door Seals: Rubber weather seals to top and bottom sections. PVC seals to guides.
Operation: Either Manual, Hand Chain or Electric (415 volt, 3 phase geared motor with manual override disconnection for hand use. 3 push button control, limit switches and safety thermal cut-out as standard.)
